Why Agilis
Four reasons technical buyers choose Agilis water jet drives: power-to-weight, one supplier for drive and controls, an impeller sized to your engine, and delivery terms we publish.
Power-to-weight without an asterisk
Up to 200 HP / 150 kW from a 29 kg drive, and up to 300 HP / 224 kW from 30 kg. That is 6.9 and 10.0 HP per kilogram of pump.
The number has a mechanism, not a trick: die-cast aluminium holds thin, repeatable wall sections, so material sits only where load requires it. The dry weight scope is stated line by line in each model's specification table. Read why die casting makes the units light, or check the tables on the AWJ 186 and AWJ 200 pages.
One supplier for drive and controls
The jet and its CAN control electronics are engineered together, in the same office, for the same boats.
Drive-by-wire, natively
Electric reverse as standard, electric trim and optional electric steering. No hydraulics, no mechanical linkages, no third-party throttle box.
Full telemetry over CAN
Engine errors, temperature, speed and RPM published on the CAN bus. NMEA 2000 bridging and autopilot-to-coordinate come from the same control unit family.
No cross-vendor risk
One interface plan, one wiring loom, one supplier responsible for the whole chain from throttle lever to nozzle.
Sized to your engine, not to a catalogue step
Impeller pitch and nozzle are inverse-designed for the specific engine and application, then validated by our engineers before manufacture.
Enter your hull and engine in the configurator and get an indicative top speed, cruise prediction and recommended drive, computed with the same Savitsky-based method our engineers use.
Size a drive for your boatTerms we publish
Standard lead time 4 weeks, confirmed on order. 12-month warranty.
Pricing on request, configured to your application.
Put a number on it
Run your boat through the configurator, or talk to our engineers directly.